|
|
IEC 60584-1 Ed. 2.0 b:1995, Thermocouples - Part 1: Reference tables
(more)
»rank:
Editorial Product Review: :Establishes a set of reference tables for the seven most commonly used types of commercially available thermocouples, giving both electromotive force as a function of temperature and temperature as a function of electromotive force. Gives polynominal expressions from which the reference values can be computed. The reference tables are based on fundamental research and are consistent with the current edition of the International Practical Temperature Scale (1968) and are not limited to applications in the field of industrial ...
Detailpage
|
|
IEC 60512-23-4 Ed. 1.0 b:2001, Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
(more)
»rank:
Editorial Product Review: :Defines two test methods for evaluating the performance of a connector in a transmission line by measuring the reflections produced by it in the time domain. The connector is treated as a discontinuity in a transmission line with a controlled characteristic impedance.
Detailpage
|
|
|
IEC 60529 Ed. 2.1 b:2001, Degrees of protection provided by enclosures (IP Code)
(more)
»rank:
Editorial Product Review: :Applies to the classification of degrees of protection provided by enclosures for electrical equipment with a rated voltage not exceeding 72,5 kV. Has the status of a basic safety publication in accordance with IEC Guide 104.
Detailpage
|
|
IEC 60571 Ed. 2.0 b:1998, Electronic equipment used on rail vehicles
(more)
»rank:
Editorial Product Review: :Applies to all electronic equipment for control, regulation, protection, supply etc associated with the accumulator battery of the vehicle or a low voltage power supply source with or without the direct connection to the contact system. Does not apply however to electronic power circuits which conform to IEC 61287-1. It covers the conditions of operation, design, construction and testing of electronic equipement as well as basic hardware and software requirements.It cancels and replaces IEC 60571-1, 60571-2 and 60571-3.
Detailpage
|
|
|
IEC 60691 Ed. 3.0 b:2002, Thermal-links - Requirements and application guide
(more)
»rank:
Editorial Product Review: :Applies to thermal-links, intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal conditions. May be applicable to thermal-links for use under other than indoor conditions, provided that the climatic and other circum- stances in the immediate surroundings of such thermal-links are comparable with those in this standard.
Detailpage
|
|
IEC 60519-6 Ed. 2.0 b:2002, Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment
(more)
»rank:
Editorial Product Review: :Applies to equipment using microwave energy alone or in combination with other kinds of energy for industrial heating of materials. Applicable to industrial microwave heating equipment operating in the frequency range 300 MHz to 300 GHz. Does not apply to appliances for household and similar purposes (covered by IEC 60335-2-25 and IEC 60335-2-90).
Detailpage
|
|
|
IEC 60439-3 Ed. 1.2 b:2001, Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear ... persons have access for their use - Di
(more)
»rank:
Editorial Product Review: :This standard gives supplementary requirements for enclosed distribution boards (DBU), which are stationary, type-tested assemblies (TTA) for indoor use, containing protective devices and intended for use either in domestic (household) applications or in other places where unskilled persons have access for their use.
Detailpage
|
|
IEC 60519-10 Ed. 1.0 b:2005, Safety in electroheat installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
(more)
»rank:
Editorial Product Review: :Deals with safety requirements for electrical resistance trace heating systems in industrial and commercial applications. Pertains to trace heating systems that may comprise either factory fabricated or field (work-site) assembled units, and which may be series heater cables, parallel heater cables, heater pads or heater panels.
Detailpage
|
|
|
IEC 60539-1 Ed. 1.0 en:2002, Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
(more)
»rank:
Editorial Product Review: :Deals with safety requirements for electrical resistance trace heating systems in industrial and commercial applications. Pertains to trace heating systems that may comprise either factory fabricated or field (work-site) assembled units, and which may be series heater cables, parallel heater cables, heater pads or heater panels.
Detailpage
|
|
IEC 60512-9-3 Ed. 1.0 b:2006, Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load
(more)
»rank:
Editorial Product Review: :Details a standard test method to assess the mechanical and electrical operational endurance of electromechanical components in the normal operating mode with a specified electrical load.
Detailpage
|