|
|
IEC 60721-3-4 Ed. 2.0 b:1995, Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities ... use at non-weatherprotected locations
(more)
»rank: 3949216
Editorial Product Review: :Classifies groups of environmental parameters and the severities to which a product may be exposed under use conditions, including periods of erection work, downtime, maintenance and repair, when mounted for stationary use at locations which are non-weatherprotected.
Detailpage
|
|
IEC 61000-4-2 Ed. 1.2 b:2001, Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
(more)
»rank: 3949215
Editorial Product Review: :This publication is based on IEC 60801-2 (second edition: 1991). It relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from operators directly, and to adjacent objects. It additionally defines ranges of test levels which relate to different environmental and installation conditions and establishes test procedures. The object of this standard is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to electrostatic discharges. In ...
Detailpage
|
|
|
IEC WT 01 Ed. 1.0 en:2001, IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures
(more)
»rank: 3885133
Editorial Product Review: :This publication is based on IEC 60801-2 (second edition: 1991). It relates to the immunity requirements and test methods for electrical and electronic equipment subjected to static electricity discharges, from operators directly, and to adjacent objects. It additionally defines ranges of test levels which relate to different environmental and installation conditions and establishes test procedures. The object of this standard is to establish a common and reproducible basis for evaluating the performance of electrical and electronic equipment when subjected to electrostatic discharges. In ...
Detailpage
|
|
IEC/TR 60721-4-0 Ed. 1.0 b:2002, Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental ... tests of IEC 60068 - Introduction
(more)
»rank: 3912426
Editorial Product Review: :A technical report dealing with the correlation and transformation of the conditions given in IEC 60721-3 to the environmental tests defined in IEC 60068-2. It is an introduction to the series of publications IEC 60721-4 which aims at providing the specif
Detailpage
|
|
|
IEC/TS 61400-23 Ed. 1.0 en:2001, Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades
(more)
»rank: 3929153
Editorial Product Review: :Is a technical specification providing guidelines for the full-scale structural testing of wind turbine blades and for the interpretation or evaluation of results, as a possible part of a design verification of the integrity of the blade. Includes static strength tests, fatigue tests, and other tests determining blade properties.
Detailpage
|
|
ISO 10993-7:1995, Biological evaluation of medical devices -- Part 7: Ethylene oxide sterilization residuals
(more)
»rank: 4593698
Editorial Product Review: :Specifies allowable limits for residual ethylene oxide (EO) and ethylene chlorohydrin (ECH) in individual EO-sterilized medical devices and procedures for the measurement of EO and ECH. Does not apply for EO-sterilized devices that have no patient contact such as in vitro diagnostic devices.
Detailpage
|
|
|
ISO 11137-3:2006, Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects
(more)
»rank: 4399979
Editorial Product Review: :ISO 11137-3:2006 gives guidance on the requirements in ISO 11137 parts 1 and 2 relating to dosimetry. Dosimetry procedures related to the development, validation and routine control of a radiation sterilization process are described. This title may contain less than 24 pages of technical content.
Detailpage
|
|
ISO 11620:1998, Information and documentation -- Library performance indicators
(more)
»rank: 4595867
Editorial Product Review: :This International Standard is applicable to all types of libraries in all countries. Limitations on the applicability of individual performance indicators are listed in the scope clause of the description of each indicator (see annex B).Indicators may be used for comparison over time within the same library. Comparisons between libraries may also be made, but only with extreme caution, taking into account any differences in the constituencies of the libraries, with good understanding of the indicators used, and careful interpretation of the data ...
Detailpage
|
|
|
ISO 12858-2:1999, Optics and optical instruments -- Ancillary devices for geodetic instruments -- Part 2: Tripods
(more)
»rank: 4751456
Editorial Product Review: :This part of ISO 12858 specifies the most important requirements of telescopic tripods for surveying instruments and the connection between instrument and tripod.The requirements in this part of ISO 12858 enable instruments and tripods of different manufacturers to be joined to one another, without prejudicing their performance and their usefulness.This part of ISO 12858 is applicable to tripods which are used for levels, theodolites, tacheometers, GPS equipment, EDM instruments and in combination with targets, reflectors, antennae, etc. This title may contain less than ...
Detailpage
|
|
ISO 14644-3:2005, Cleanrooms and associated controlled environments - Part 3: Test methods
(more)
»rank: 255208
Editorial Product Review: :ISO 14644-3:2005 specifies test methods for designated classification of airborne particulate cleanliness and for characterizing the performance of cleanrooms and clean zones. Performance tests are specified for two types of cleanrooms and clean zones: those with unidirectional flow and those with non-unidirectional flow, in three possible occupancy states: as-built, at-rest and operational. ISO 14644-3:2005 is not applicable to the measurement of products or of processes in cleanrooms or separative devices.
Detailpage
|