|
|
IEC 60672-3 Ed. 2.0 b:1997, Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
(more)
»rank:
Editorial Product Review: :Applicable to ceramic, glass-ceramic, glass-mica and glass materials for electrical insulating purposes giving a classification of materials and typical numerical values for the major characteristics.
Detailpage
|
|
IEC 60601-2-7 Ed. 2.0 en:1998, Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
(more)
»rank:
Editorial Product Review: :Applies to high-voltage generators of medical diagnostic X-ray generators and to their subassemblies including the following : - high-voltage generators that are integrated with an X-ray tube assembly; - high-voltage generators of radiotherapy treatment simulators. The object of this standard is to establish particular requirements to ensure safety and to specify methods for demonstrating compliance with those requirements.
Detailpage
|
|
|
IEC/TR 60649 Ed. 1.0 b:1979, Calculation of maximum external diameter of cables for indoor installations
(more)
»rank:
Editorial Product Review: :Specifies the method of calculation for maximum external diameter of low frequency cables for indoor installations. Gives an example of calculation of diameter over assembly for cable with screened elements. Has the status of a technical report. This title may contain less than 24 pages of technical content.
Detailpage
|
|
IEC 60603-7-4 Ed. 1.0 b:2005, Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for ... transmissions with frequencies up to 250 MHz
(more)
»rank:
Editorial Product Review: :Covers 8-way unshielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 250 MHz. These connectors are typically used as category 6 connectors in class E cabling systems specified in ISO/IEC 11801:2002. These connectors are intermateable, interoperable, and backward compatible with other IEC 60603-7 series connectors.
Detailpage
|
|
|
IEC 60598-2-3 Ed. 3.0 b:2002, Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
(more)
»rank:
Editorial Product Review: :Specifies requirements for luminaires for road and street lighting, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V.
Detailpage
|
|
IEC 60519-9 Ed. 2.0 b:2005, Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
(more)
»rank:
Editorial Product Review: :Is applicable to industrial high-frequency dielectric heating installations for the purpose of thermal applications such as melting, drying, welding, insect extermination and gluing of partially or non-conductive materials (plastics, wood, etc.) in both normal and protective atmospheres, using for example inert gases or vacuum. Relates to high-frequency dielectric heating installations with nominal frequency in the range from 1 MHz to 300 MHz with rated useful output power greater than 50 W. To be used in conjunction with IEC ...
Detailpage
|
|
|
IEC/TR 60695-7-2 Ed. 1.0 b:2002, Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods
(more)
»rank:
Editorial Product Review: :Gives a brief summary of the test methods that are in common use in the assessment of lethal and sublethal acute toxic potency, and other toxicity tests. It includes special observations on their relevance to real fire scenarios and gives recommendations on their use. It advises which tests provide toxic potency data which is relevant to real fire scenarios, and which are suitable for use in fire hazard assessment and fire safety engineering. Has the status of a ...
Detailpage
|
|
IEC 60477-2 Ed. 1.0 b:1979, Laboratory resistors. Part 2: Laboratory a.c. resistors
(more)
»rank:
Editorial Product Review: :In addition to above, applicable up to 100 kHz. Resistor characterization.
Detailpage
|
|
|
IEC 60745-1 Ed. 4.0 b:2006, Hand-held motor-operated electric tools - Safety - Part 1: General requirements
(more)
»rank:
Editorial Product Review: :Deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. This standard deals with the common hazards presented by hand-held tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools.
Detailpage
|
|
IEC 60424-3 Ed. 1.0 b:1999, Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
(more)
»rank:
Editorial Product Review: :Gives guidance on allowable limits of surface irregularities applicable to ETD-cores, E-cores and other similar shapes in accordance with the relevant general specification.
Detailpage
|