|
|
IEC 60598-1 Ed. 6.0 b:2003, Luminaires - Part 1: General requirements and tests
(more)
»rank:
Editorial Product Review: :This Part 1 of International Standard IEC 60598 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this standard cover: classification, marking, mechanical construction and electrical construction.
Detailpage
|
|
IEC 60534-6-1 Ed. 1.0 b:1997, Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators
(more)
»rank:
Editorial Product Review: :Intended to permit a variety of positioning devices, which respond to a linear motion, to be mounted on the actuator of a control valve, either directly or by employing an intermediate mounting bracket. Applicable where interchangeability between actuators and positioners is desired.
Detailpage
|
|
|
IEC 60747-2 Ed. 2.0 b:2000, Semiconductor devices - Discrete devices and integrated circuits - Part 2: Rectifier diodes
(more)
»rank:
Editorial Product Review: :Deals with rectifier diodes such as avalanche, controlled avalanche or fast-switching. Must be used together with IEC 60747-1 for all basic information.
Detailpage
|
|
IEC 60534-3-1 Ed. 1.0 b:2000, Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight ... globe-type, angle pattern control va
(more)
»rank:
Editorial Product Review: :This title may contain less than 24 pages of technical content.
Detailpage
|
|
|
IEC 60730-2-15 Ed. 1.1 b:1997, Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water ... type used in boiler applications
(more)
»rank:
Editorial Product Review: :Applies to automatic electrical water level sensing controls of the float and electrode-sensor type for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPa (20 bar), for household and similar use.
Detailpage
|
|
IEC 60580 Ed. 2.0 b:2003, Medical electrical equipment - Dose area product meters
(more)
»rank:
Editorial Product Review: :Specifies the performance and testing of dose area product meters with ionization chambers intended to measure dose area product and/or dose area product rate to which the patient is exposed during medical radiological examinations. The object of this International Standard is 1) to establish requirements for a satisfactory level of performance for dose area product meters, and 2) to standardize the methods for the determination of compliance with this level of performance.
Detailpage
|
|
|
IEC 60747-16-3 Ed. 1.0 en:2002, Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters
(more)
»rank:
Editorial Product Review: :Provides new measuring methods, terminology and letter symbols, as well as essential ratings and characteristics for integrated circuit microwave frequency converters.
Detailpage
|
|
IEC 60512-14-5 Ed. 1.0 b:2006, Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
(more)
»rank:
Editorial Product Review: :Details a standard test method to assess the effectiveness of the sealing of a connector against ingress of water by exposure to low pressure whilst immersed in a salt solution. Is particularly, but not exclusively, suitable for mated connector assemblies. This title may contain less than 24 pages of technical content.
Detailpage
|
|
|
IEC 60704-2-6 Ed. 2.0 b:2005, Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-6: Particular requirements for tumble dryers
(more)
»rank:
Editorial Product Review: :Applies to the methods of determination of airborne acoustical noise emitted by tumble dryers for household and similar use. This standard applies to single unit electic tumble dryers intended for placing on the floor against a wall, for building in or placing under a counter, a kitchen work-top or under a sink, for wall-mounting or for mounting on a counter. For the purpose of this standard, washer-dryer combinations, when operated as a dryer, are considered as a tumble dryer.
Detailpage
|
|
IEC 60745-2-20 Ed. 1.0 b:2003, Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws
(more)
»rank:
Editorial Product Review: :Deals with the safety of tools which the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools and 440 V for three-phase a.c. tools. Supplements or modifies the corresponding clauses of IEC 60745-1 This title may contain less than 24 pages of technical content.
Detailpage
|