|
|
IEC 60728-5 Ed. 1.0 b:2001, Cabled distribution systems for television and sound signals - Part 5: Headend equipment
(more)
»rank:
Editorial Product Review: :Defines the characteristics of equipment used in the headends of terrestrial broadcast and satellite receiving systems. Deals with the interfaces between headend components and explains the function of the devices. Lays down measuring methods, performance requirements and data publication requirements.
Detailpage
|
|
IEC 60731 Ed. 2.0 b:1997, Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy
(more)
»rank:
Editorial Product Review: :Establishes requirements for a satisfactory level of performance of dosimeters with ionization chambers intended for the measurement of absorbed dose to water or air kerma (and their rates) in photon or electron radiation fields as used in radiotherapy. Standardizes methods for the determination of compliance with this level of performance.
Detailpage
|
|
|
IEC 60454-3-3 Ed. 2.0 b:1998, Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Polyester ... tapes with rubber thermoplastic adhesive
(more)
»rank:
Editorial Product Review: :Contains requirements for polyester film tapes with rubber thermoplastic adhesive.
Detailpage
|
|
IEC 60749-18 Ed. 1.0 b:2002, Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)
(more)
»rank:
Editorial Product Review: :Provides a test procedure for defining requirements for testing packaged semiconductor integrated circuits and discrete semiconductor devices for ionizing radiation (total dose) effects from a cobalt-60 gamma ray source. Proposes an accelerated annealing test for estimating low dose rate ionizing radiation effects on devices. This annealing test is important for low dose rate or certain other applications in which devices may exhibit significant time-dependent effects. It is intended for military- and space-related applications.
Detailpage
|
|
|
IEC 60770-1 Ed. 1.0 b:1999, Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
(more)
»rank:
Editorial Product Review: :Applicable to transmitters which have either a standard analogue electric current output signal or a standard pneumatic output signal in accordance with IEC 60381-1 or IEC 60382. The tests detailed herein may be applied to transmitters which have other output signals, provided that due allowance is made for such differences. Specifies uniform methods of test for the evaluation of the performance of transmitters with pneumatic or electric output signals. Methods of evaluation are intended for use by manufacturers ...
Detailpage
|
|
IEC 60581-7 Ed. 1.0 b:1986, High fidelity audio equipment and systems: Minimum performance requirements. Part 7: Loudspeakers
(more)
»rank:
Editorial Product Review: :Applies to loudspeakers and loudspeaker systems provided with a baffle or enclosure. Also applies to systems intended to be assembled by the user (so-called 'loudspeaker kits') provided that the instructions for assembly meet certain requirements. Gives the minimum performance requirements and methods of measurement for loudspeakers and loudspeaker systems.
Detailpage
|
|
|
IEC 60748-22 Ed. 2.0 b:1997, Semiconductor devices - Integrated circuits - Part 22: Sectional specification for film integrated circuits and hybrid film ... basis of the capability approval procedures
(more)
»rank:
Editorial Product Review: :Applies to film and hybrid film integrated circuits (F and HICs), manufactured as catalogue or as custom-built circuits whose quality is assessed on the basis of the capability approval procedure. Presents preferred values for ratings and characteristics, selects from the generic specification the appropriate tests and measuring methods and gives general performance requirements to be used in detail specifications for film and hybrid film integrated circuits.
Detailpage
|
|
IEC 60598-2-22 Ed. 3.1 b:2002, Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
(more)
»rank:
Editorial Product Review: :Specifies requirements for emergency lighting luminaires for use with tungsten filament fluorescent and other discharge lamps on energency power supplies not exceeding 1 000 V.
Detailpage
|
|
|
IEC 60745-2-16 Ed. 1.0 b:1993, Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for tackers
(more)
»rank:
Editorial Product Review: :Deals with the particular safety requirements for electric tackers defined as tools using fasteners, e.g. metal pins, nails and staples for fixing in wood or similar material. This title may contain less than 24 pages of technical content.
Detailpage
|
|
IEC 60601-2-36 Ed. 1.0 b:1997, Medical electrical equipment - Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy
(more)
»rank:
Editorial Product Review: :Applies to the safety of equipment for extracorporeally induced lithotripsy, i.e. device for treatment with extracorporeally generated pressure pulses. The applicability of this standard is limited to components directly involved in the lithotripsy treatment, such as, but not limited to, the generator of the pressure pulse, patient support device, and their interactions with imaging and monitoring devices.
Detailpage
|