|
|
IEC 60745-2-16 Ed. 1.0 b:1993, Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for tackers
(more)
»rank:
Editorial Product Review: :Deals with the particular safety requirements for electric tackers defined as tools using fasteners, e.g. metal pins, nails and staples for fixing in wood or similar material. This title may contain less than 24 pages of technical content.
Detailpage
|
|
IEC 60598-2-20 Ed. 2.2 b:2002, Luminaires - Part 2-20: Particular requirements - Lighting chains
(more)
»rank:
Editorial Product Review: :Specifies requirements for lighting chains fitted with series or parallel connected incandescent lamps for use indoors or outdoors on supply voltages not exceeding 250 V.
Detailpage
|
|
|
IEC 60761-5 Ed. 2.0 b:2002, Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 5: Specific requirements for tritium monitors
(more)
»rank:
Editorial Product Review: :Establishes specific standard requirements, including technical characteristics and general test conditions and gives examples of acceptable methods for the tritium effluent monitors.
Detailpage
|
|
IEC 60748-23-1 Ed. 1.0 en:2002, Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification
(more)
»rank:
Editorial Product Review: :Applies to high quality hybrid integrated circuits (with films) incorporating special customer quality and reliability requirements. Hybrid integrated circuits may be fully or partly completed. Partly completed devices are those that may be supplied to customers for further processing.
Detailpage
|
|
|
IEC 60738-1-2 Ed. 1.0 en:1998, Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessmen level EZ
(more)
»rank:
Editorial Product Review: :Supplementary document to the generic specification, contains requirements for style and layout and minimum content of detail specifications. This title may contain less than 24 pages of technical content.
Detailpage
|
|
IEC 60738-1 Ed. 3.0 en:2006, Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
(more)
»rank:
Editorial Product Review: :Prescribes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.
Detailpage
|
|
|
IEC 60534-2-3 Ed. 2.0 b:1997, Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
(more)
»rank:
Editorial Product Review: :Applies to industrial-process control valves and provides the flow capacity test procedures for determining some of the variables used in the equations given in IEC 60534-2.
Detailpage
|
|
IEC 60749-18 Ed. 1.0 b:2002, Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)
(more)
»rank:
Editorial Product Review: :Provides a test procedure for defining requirements for testing packaged semiconductor integrated circuits and discrete semiconductor devices for ionizing radiation (total dose) effects from a cobalt-60 gamma ray source. Proposes an accelerated annealing test for estimating low dose rate ionizing radiation effects on devices. This annealing test is important for low dose rate or certain other applications in which devices may exhibit significant time-dependent effects. It is intended for military- and space-related applications.
Detailpage
|
|
|
IEC/TR 60721-4-3 Ed. 1.1 b:2003, Classification of environmental conditions - Part 4-3: Guidance for the correlation and transformation of environmental ... of IEC 60068 - Stationary use at weatherpr
(more)
»rank:
Editorial Product Review: :Deals with the correlation and transformation of the conditions given in IEC 60721-3-3 to the environmental tests defined in IEC 60068-2. An environment may consist of a number of environmental conditions such as dynamic, climatic and biological and other effects due to chemically and mechanically active substances. In this report, only dynamic and climatic conditions have been considered. The purpose of this technical report is to provide the specification writer with guidance together with a set of ...
Detailpage
|
|
IEC 60745-2-1 Ed. 2.0 b:2006, Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills
(more)
»rank:
Editorial Product Review: :Deals with the safety of hand-held motor-operated or magnetically driven electric tools, specific requirements for drills and impact drills. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three-phase a.c. tools
Detailpage
|